Skip to end of metadata
Go to start of metadata


Preparations

Configuring Agent

For testing purposes create an agent with a complex software RAID layout with seven (7) different disks:

The following screen-shot shows how the example layout looks in fdisk.

Creating a Disk Safe

Create a Disk Safe with the "Protect Storage Configuration" option enabled. See Creating Disk Safes.

Creating and Running a Policy

1. Create a basic Policy for the new Disk Safe. See Creating Policies.

2. Run the created Policy. See Running Policies.


Bare-Metal Restore Process

Follow the instructions below to start the Software RAID (MD) Bare Metal Restore.

Note
The process is the same for all Boot methods:
  • Live CD
  • PXE Network Boot


Step 1:  Boot from Live CD or PXE Network Boot

If you are restoring your system partition (e.g., /, /boot, /bin, /lib, etc.), boot the physical or virtual machine from one of the available CDP disaster recovery media options(Live CD or PXE Network Boot).

For more information, see:

Step 2: Initiate a Bare-Metal Restore from "Recovery Points"

1. Click on "Recovery Points" in the Main Menu to open the "Recovery Points" screen.

Enterprise Edition LiveCD Server, PXE Server

2. Select an Agent from the drop-down menu located on the "Recovery Points" list toolbar.

3. Select a Disk Safe from the drop-down menu located on the "Recovery Points" list toolbar.

Tip
Alternatively, you can click on "Agents" in the main menu, then select the "Disk Safes" tab in the bottom pane, and then click on the "Recovery Points" icon for the Disk Safe to access the Recovery Points list.

4. In the "Recovery Points" list, click on the "Bare-Metal Restore" icon in the "Actions" column for the Recovery Point from which you are going to restore.

Tip
To find a Recovery Point, you can use the Basic and Advanced List Filters. See Customizing the Recovery Points List.

5. The "Bare-Metal Restore" window opens.

Look through the information on the Introduction screen and click "Next."

Step 3: Choose Filesystems

On the next page, select the filesystem(s) you want to restore. All available filesystems are listed. In our example, we select the /, /boot, /home, /home/user1 and /home/user2 filesystems.

Click "Next" to proceed to the following step.

Step 4: Select Host

On the next screen, select the "Restore to Alternate Host Name/IP" option. Enter the IP address and port of your Live CD or PXE Boot environment.

Click "Next" to proceed to the following step.

Step 5: Define Restore Storage Configuration

On the "Restore Storage Configuration" screen, choose the "Select Storage Configuration to Restore" option.

Click "Next" to proceed to the following step.

5.1 Choose Partition Tables

Partition tables should be restored before restoring LVM Volume Groups. Go through all of the Partition Tables steps before moving on to the LVM Volume Groups:

  • Choose Partition Tables
  • Select Partition Tables
  • Map Partition Tables
  • Restore Partition Tables

On the "Choose Partition Tables" screen, choose the "Select Partition Tables to Restore" to select partition tables from the Recovery Point to restore to the target host.

Click "Next" to proceed to the following step.

Then choose the appropriate partition table layout(s) for the filesystems you want to restore. At least one partition table check-box must be selected.

Click "Next" to proceed to the following step.

After choosing partition tables to restore, you need to map the partition tables to the disks on the target host. Map all the partition tables selected.

Notice
The target disk must be large enough to hold the partition table, and each target disk can only be selected once.

Tip
Click the plus sign to see the details of a partition table.

The following information is available:

  • Content Type
  • Size
  • Number Of Sectors
  • Sector Size
  • Serial Number 
  • Partitions

Click "Next" to proceed to the following step.

On the next screen, click on the "Restore Partition Tables" button.

You should then receive the "Successfully Restored Partition Tables" message. Click "OK."

Output from fdisk before partition table restore:

Output from fdisk after partition table restore (should match original):

5.2 Choose Software RAID Devices

On the "Choose Software RAID Device" screen, choose the "Select Software RAID Device to Restore" option.

Click "Next" to proceed to the following step.

Then select Software RAID Arrays to restore in the corresponding check box.

Tip
Click the plus sign to see the details of a Software RAID Array.

The following information is available:

  • Content Type
  • Size
  • RAID Level
  • Chunk Size
  • Layout
  • Number of Devices
  • Members

Click "Next" to proceed to the following step.

After choosing the Software RAID Arrays to restore, map them.

Notice
Mapping RAID arrays is hierarchical. Instead of mapping the actual RAID device (/dev/md0), you should map its active and spare members.

Click "Next" to proceed to the following step.

When all the members are mapped, click the "Restore Software RAID Devices" button to launch the restore.

When the restore completes successfully, the RAID arrays will be available for mapping the selected file systems.

Step 6: Map Filesystems

Map file systems in the Recovery Point to software RAID devices as a restore destination.

Enter the new software RAID device as the destination (for example, /dev/md_new).

You are provided a table that allows you to map the chosen Partition Tables to physical Disks on the Target Agent. You can see as many lines in the table as the number of Partition Tables selected for restore. Each Partition Table must be mapped to a physical Disk on the Target Agent before proceeding.

Notice
Make sure that the partition for /boot is big enough.
Tip
Click the plus sign to see the details of filesystems.

After selecting the Disks, click on "Next" to proceed to the next page.

Step 7: Map Filesystems

Make sure the "Reboot after restore" box is unchecked.

Click "Next" to proceed to the following step.

Step 8: Summary

On the "Summary" page, you will need to confirm the selected Bare-Metal Restore options. Each selected file system is listed along with the name of the target device to which it is being mapped.

Click "Restore" to start the Bare-Metal Restore task.

The data Restore is initiated. Click "OK" in the notification pop-up.

Tip
The Task results can be sent via email as a Report. See Reporting.

Step 9: Bare-Metal Restore Start

The Restore process starts and can take awhile. You can go to the "Task History" screen to observe the task progress. See Accessing Task History.

The Task History page displays the State, Alert, Type, Progress Percentage, and the Started Time Stamp of the Bare-Metal Restore process.

Step 9: Reboot

When the process is complete, you can reboot the server you just restored by pressing <Ctrl><Alt><Del> or by executing the reboot command in the root shell.

Note
Make sure you eject the Disk from the CD-ROM drive so that the server will boot from the hard Disk.

If the Disk you used for your Bare-Metal Restore is larger than the Disk you backed up previously, the free space on the new Disk will remain free. You can create a new Partition in this space.

Results of RAID Arrays creation can be verified at the command line via the "ls" command.

Before restoring software RAID devices:

After restoring software RAID devices:

Labels:
None
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.