You can access the Server Backup Manager web interface through any of our supported web browsers, such as Chrome, Firefox, or Internet Explorer.
You can connect to the Backup Manager Web Interface from the Windows Start Menu (Start > All Programs > Server Backup > Server Backup Manager).
The Start menu folder may be different from the above if the User chose a different name during the Server Backup installation.
Alternatively, you can connect to the Backup Manager Web Interface from the computer where it is installed by typing "localhost" into the address bar of the web browser:
If the default HTTP port "80" was not selected during the installation, specify the port; for example, "http://localhost:81".
To connect to the Backup Manager web interface from any computer connected to Internet/LAN, follow the instructions below.
In the address bar of the browser, type the IP address (Host Name) of the Backup Manager. Typically, it is same as the IP address of the computer. Example:
In Windows, you can learn the IP address of the computer by following these instructions: Click "Start," select "Run" (in some versions), type "cmd," type "ipconfig," and hit <Enter>. The IP address of your PC will be displayed among the other configuration parameters.
In Linux, type the "ifconfig" command to determine the IP address of the machine.
If the default HTTP port "80" was not selected during the installation, specify the port; for example, "http://220.127.116.11:81".
You can use the following connection types to connect to the Backup Manager web interface:
- The Backup Manager Web Interface - Uses HTTP protocol
- The Backup Manager Secure Web Interface - Uses encrypted (SSL) HTTPS connections
The Backup Manager Secure Web Interface uses encrypted (SSL) HTTPS connections. To access the Backup Manager securely, add "https://" before the IP address (Host Name) of the Backup Manager. See also: Running Backup Manager over SSL (HTTPS).
By default, HTTP and SSL are enabled. You can configure these settings in the Web Server Options screen. To access this screen, click Advanced Options in the Main Menu and select Web Server Options. For more information, refer to Web Server Options.
Once you have established a connection to the Backup Manager, you will be prompted for a Username and Password. Enter the Password you specified during installation and click the Login button.
Proceed to the next step: Activate Server Backup Manager.