|
Key
This line was removed.
This word was removed. This word was added.
This line was added.
|
Changes (64)
View Page HistoryServer Backup Data Center Console allows you to monitor parameters of Volumes on multiple Server Backup Managers at once. You can do so from the "Volumes" screen.
Server Backup Manager Data Center Console allows you to monitor volume parameters on multiple Server Backup Managers at once from the Volumes window.
Follow the instructions below to access the "Volumes" screen.
*To monitor volumes*:
1. Select "Volumes" from the Main Menu.
!Volumes.png!
You will enter the "Volumes" screen.
!Volumes.png!
You will enter the "Volumes" screen.
In the Main menu, click *Volumes*. Server Backup Manager displays the Volumes window as shown in the following image.
!132dcc.png!
...
---- ----
h3. The "Volumes" List
h3. Using the Volumes list
The list of all Volumes is displayed. The following columns are shown:
* *Status* \- The status of a Volume. See [Using Data Center Console Dashboard|Use Data Center Console Dashboard] for more information about the different Volume statuses.
* *Name* \- The name of the Volume. Volume name is used to identify the Volume in the system.
* *Status* \- The status of a Volume. See [Using Data Center Console Dashboard|Use Data Center Console Dashboard] for more information about the different Volume statuses.
* *Name* \- The name of the Volume. Volume name is used to identify the Volume in the system.
SBM displays a list of all volumes including the following columns:
* *Status*. Displays the volume status. For more information about the different volume statuses available, see [ServerBackup:Use Data Center Console Dashboard].
* *Name*. Displays the volume name. SBM uses the volume name to identify the volume in the system.
* *Status*. Displays the volume status. For more information about the different volume statuses available, see [ServerBackup:Use Data Center Console Dashboard].
* *Name*. Displays the volume name. SBM uses the volume name to identify the volume in the system.
* *Backup Manager* \- The Manager*. Displays the name/IP of the backup manager to which the current Vvolume belongs.
{info:title=Note}The backup manager name/IP is displayed in the form of a link. You can click the link for quick access to the backup manager.
!133dcc.png!
{info}
!133dcc.png!
{info}
* *Quota Type* \- The type of quota assigned to the Volume. If no quota is defined for the Volume, then the red icon is displayed. Quotas are set to limit the disk usage of the Volume. The limit is set for all Disk Safes in the Volume on the basis of space occupied by Disk Safes, size of deltas, or number of deltas.
{info:title=Tip}You can define Disk Quotas in Configuration. See [Configuring Manager Options].
{info:title=Tip}You can define Disk Quotas in Configuration. See [Configuring Manager Options].
* *Quota Type*. Displays the type of quota assigned to the volume. *{_}If no quota is defined for the volume{_}*, then Server Backup Manager displays a red icon. Set a quota to limit the disk usage of the volume. The limit is set for all disk safes in the volume on the basis of space occupied by the disk safes, the size of deltas, or the number of deltas.
{info:title=Tip}You can define disk quotas in Configuration. For more information about configuring disk quotes, see [ServerBackup:Configure Manager Options].
{info:title=Tip}You can define disk quotas in Configuration. For more information about configuring disk quotes, see [ServerBackup:Configure Manager Options].
{info}
* *Soft Quota* \- The value in bytes or in deltas. Soft Quota is a warning level that informs users that they are close to reaching their effective limit.
* *Hard Quota* \- The value in bytes or in deltas. Hard Quota allows resources to be occupied by data. If the Hard Quota is reached, then the system forbids generation of new Recovery Points. The replication is interrupted and failed.
* *On Disk Size* \- The value in bytes. Displays the disk space occupied by the Volume.
* *Deltas* \- The value in bytes. Deltas are the data that has changed since the last backup run.
* *Actions* \- This column contains the list of actions that can be performed over the Volume. See the description below.
* *Hard Quota* \- The value in bytes or in deltas. Hard Quota allows resources to be occupied by data. If the Hard Quota is reached, then the system forbids generation of new Recovery Points. The replication is interrupted and failed.
* *On Disk Size* \- The value in bytes. Displays the disk space occupied by the Volume.
* *Deltas* \- The value in bytes. Deltas are the data that has changed since the last backup run.
* *Actions* \- This column contains the list of actions that can be performed over the Volume. See the description below.
* *Soft Quota*. Displays the warning quota value in bytes or deltas. The soft quota is a warning level that informs users that they are close to reaching their effective limit.
* *Hard Quota*. Displays the stopping quota value in bytes or in deltas. The hard quota allows you to store data in resources until you reach the *Hard Quota*. At that point, the system forbids generation of new recovery points. The replication is interrupted and failed.
* *On Disk Size*. Displays the disk space occupied by the volume in bytes.
* *Deltas*. Displays the byte value of data that changed since the last backup ran.
* *Actions*. Displays the list of actions available over the volume.
* *Hard Quota*. Displays the stopping quota value in bytes or in deltas. The hard quota allows you to store data in resources until you reach the *Hard Quota*. At that point, the system forbids generation of new recovery points. The replication is interrupted and failed.
* *On Disk Size*. Displays the disk space occupied by the volume in bytes.
* *Deltas*. Displays the byte value of data that changed since the last backup ran.
* *Actions*. Displays the list of actions available over the volume.
{info:title=Tip}Use "Pages Navigation" to look through the "Volumes" list more efficiently.
{info:title=Tip}Use the page navigation icons to look through the Volumes list more efficiently.
!82.png!
{info}
{info}
h5. The Volumes Actions
h5. Available volume actions
The Volumes list contains the "Actions" pane.
The Volumes list contains the Actions pane, as shown in the following image.
!87.png!
The following Actions are available:
Server Backup Manager allows you to perform the following actions:
|| Icon || Action || Description ||
| !75.png! | *Edit* | Click this icon to edit the Volume properties. See [Edit volumes in DCC]. |
| !79.png! | *Remove* | Click this icon to delete the Volume configuration from the Console. All backed up data will remain on the disk and the Volume folder is kept. |
| !80.png! | *Delete* | Click this icon to delete the Volume from the Console. |
| !79.png! | *Remove* | Click this icon to delete the Volume configuration from the Console. All backed up data will remain on the disk and the Volume folder is kept. |
| !80.png! | *Delete* | Click this icon to delete the Volume from the Console. |
| !75.png! | *Edit* | Allows you to edit the volume properties. For more information about editing volumes, see [Edit volumes in DCC]. |
| !79.png! | *Remove* | Allows you to delete the volume configuration from the Console. All backed up data remains on the disk and the volume folder is kept. |
| !80.png! | *Delete* | Allows you to delete the volume from the Console. |
| !79.png! | *Remove* | Allows you to delete the volume configuration from the Console. All backed up data remains on the disk and the volume folder is kept. |
| !80.png! | *Delete* | Allows you to delete the volume from the Console. |
h5. Filtering the "Volumes" List Volumes list
h6. Basic List Filter
You can use a Basic List Filter to sort the "Volumes" list. Click on the "Basic List Filter" button to access the filtering options.
!134dcc.png!
Select the necessary options and click "Filter."
!134dcc.png!
Select the necessary options and click "Filter."
*To sort the Volumes list*:
# In the Volumes menu, click *Basic List Filter*. Server Backup Manager displays the Basic List Filter dialog box.
# Select the necessary options, and then click *Filter* as shown in the following image.
# In the Volumes menu, click *Basic List Filter*. Server Backup Manager displays the Basic List Filter dialog box.
# Select the necessary options, and then click *Filter* as shown in the following image.
!137dcc.png!
If you want to discard filtering options and view the whole list, click *Show All*.
If you want to discard filtering options and view the whole list, click "Show All."
!136dcc.png!
!136dcc.png!
h6. Advanced List Filter
The Advanced List Filter allows you to reduce the number of Vvolumes in the list on the basis of all possible filter options.
Follow the instructions below to apply the Advanced Filter to the "Volumes" list.
*To apply the Advanced Filter to the Volumes list*:
1. Click on "Advanced List Filter" in the Volumes menu.
!135dcc.png!
2. The "Advanced List Filter" window will open.
!135dcc.png!
2. The "Advanced List Filter" window will open.
# In the Volumes menu, click *Advanced List Filter*. SBM displays the Advanced List Filter dialog box as shown in the following image.
!adv-filt-vol.png!
You can hide/open the filter options for every block by clicking on the header of the corresponding block.
# Define one or more of the following filter options:
# Define one or more of the following filter options:
This window has the several blocks with filter options.
{info:title=Tip}You can hide/open the filter options for every block by clicking on the header of the corresponding block.
{info}
3. Define one or several filter options:
* *Name* \- Select this checkbox to filter the list by the Volume Name.
* *Description* \- Select this checkbox to filter the list by the Volume Description.
* *Volume Path* \- Select this checkbox to filter the list by the Volume Path.
* *Soft Quota* \- Select this checkbox to filter the list by the Soft Quota defined for the Volumes.
* *Hard Quota* \- Select this checkbox to filter the list by the Hard Quota defined for the Volumes.
{info:title=Tip}You can hide/open the filter options for every block by clicking on the header of the corresponding block.
{info}
3. Define one or several filter options:
* *Name* \- Select this checkbox to filter the list by the Volume Name.
* *Description* \- Select this checkbox to filter the list by the Volume Description.
* *Volume Path* \- Select this checkbox to filter the list by the Volume Path.
* *Soft Quota* \- Select this checkbox to filter the list by the Soft Quota defined for the Volumes.
* *Hard Quota* \- Select this checkbox to filter the list by the Hard Quota defined for the Volumes.
** *Name*. Check this box to filter the list by the volume name.
** *Description*. Check this box to filter the list by the volume description.
** *Volume Path*. Check this box to filter the list by the volume path.
** *Soft Quota*. Check this box to filter the list by the soft quota defined for the volumes.
** *Hard Quota*. Check this box to filter the list by the hard quota defined for the volumes.
** *Description*. Check this box to filter the list by the volume description.
** *Volume Path*. Check this box to filter the list by the volume path.
** *Soft Quota*. Check this box to filter the list by the soft quota defined for the volumes.
** *Hard Quota*. Check this box to filter the list by the hard quota defined for the volumes.
The following items are available in the drop-down list:
* *Starts with* \- To filter by Name/Description that begins with a specific character(s). Type in the beginning characters of the Name/Description.
* *Contains* \- To filter by Name/Description that has specific character(s) anywhere in the text. Type in characters that can be contained in the Name/Description.
* *Ends with* \- To filter by Name/Description that ends with a specific character(s). Type in the ending characters of the Name/Description.
* *Min...bytes (for Soft and Hard Quotas)* \- To filer by Soft or Hard Quota of the defined minimum size in bytes.
* *Max...bytes (for Soft and Hard Quotas)* \- To filer by Soft or Hard Quota of the defined maximum size in bytes.
* *Contains* \- To filter by Name/Description that has specific character(s) anywhere in the text. Type in characters that can be contained in the Name/Description.
* *Ends with* \- To filter by Name/Description that ends with a specific character(s). Type in the ending characters of the Name/Description.
* *Min...bytes (for Soft and Hard Quotas)* \- To filer by Soft or Hard Quota of the defined minimum size in bytes.
* *Max...bytes (for Soft and Hard Quotas)* \- To filer by Soft or Hard Quota of the defined maximum size in bytes.
** *Starts with*. Allows you to filter by name/description that begins with a specific character(s). Type in the beginning characters of the name or description.
** *Contains*. Allows you to filter by name/description that has specific character(s) anywhere in the text. Type in characters that can be contained in the name or description.
** *Ends with*. Allows you to filter by name/description that ends with a specific character(s). Type in the ending characters of the name or description.
** *Min...bytes (for Soft and Hard Quotas)* \- Allows you to filter by soft or hard quota of the defined minimum size in bytes.
** *Max...bytes (for Soft and Hard Quotas)* \- Allows you to filter by soft or hard quota of the defined maximum size in bytes.
** *Contains*. Allows you to filter by name/description that has specific character(s) anywhere in the text. Type in characters that can be contained in the name or description.
** *Ends with*. Allows you to filter by name/description that ends with a specific character(s). Type in the ending characters of the name or description.
** *Min...bytes (for Soft and Hard Quotas)* \- Allows you to filter by soft or hard quota of the defined minimum size in bytes.
** *Max...bytes (for Soft and Hard Quotas)* \- Allows you to filter by soft or hard quota of the defined maximum size in bytes.
4. Click on "Filter" to apply the search filter.
3. Click Filter to apply the search filter.
!adv-filt-vol1.png!\\
{info:title=Tip}Click the "Show all" link to see the whole list of Volumes. !111.png!{info}
{info:title=Tip}Click *Show all* to see the whole list of volumes. !111.png!{info}
----
h3. Details Pane
h3. Details Pane
The Details pane provides more detailed information about the Vvolume selected in the list on the top. The pane has three tabs:
* *Details*
* *Groups*
* *Groups*
...----
h5. Details Ttab
Most of the information presented here in the Details tab is the same as the data shown in the Volumes list columns. For more information about server details, see [Access Backup Managers in DCC].
!138dcc.png!
If you click on the "Detail" icon near the backup manager name, you can access the backup manager details window as shown bellow.
If you click the Detail icon near the backup manager name, you can access the backup manager details window as shown in the following image.
!33dcc.png!
h5. Disk Safes Ttab
Shows the list of Disk Safes assigned to the Volume.
The Disk Safes tab displays the list of disk safes assigned to the volume.
!b41.png!
h5. Groups Tab
h5. Groups Tab
The Groups tab displays the list of groups assigned to the volume.
!dett2.png!
Displays the list of groups assigned to the Volume.
h5. Users Tab
The Users tab displays the list of users assigned to the volume.
!dett3.png!
Displays the list of users assigned to the Volume.
h5. Limits Tab
Shows Quotas, Data Retention rules, and permission settings.
The Limits tab displays quotas, data retention rules, and permission settings.
!139dcc.png!
*Quotas*
* *Quota Type* \- Quotas are set to limit the disk usage of the Volume. It can be "On Disk Size" or "Size of Deltas in Disk Safe."
* *Quota Type*. Quotas are set to limit the disk usage of the volume. You can select whether the quota is on the disk size or the size of the deltas in the disk safe.
* *Soft Quota* \- The Quota*. Displays the value in bytes, KB, MB, GB or TB. Soft Qquota is a warning level where users are informed that they are close to reaching their effective limit.
* *Hard Quota* \- The Quota*. - Displays the value in bytes, KB, MB, GB or TB. Maximum resources allowed to be occupied by data.
{excerpt:hidden=true}Instructions on how to access and use the Volumes list in Data Center Console.{excerpt}