Version 13 by Nata Ramanenka
on Mar 02, 2012 03:14.
<< Changes from 12 to 13
compared with
Current by Nata Ramanenka
on Mar 05, 2012 01:02.
Key
This line was removed.
This word was removed. This word was added.
This line was added.

Changes (20)

View Page History
After [installation|CDP3:Installing Enterprise Edition on Linux], you need to configure the CDP Server. You can get examples of the input with:
{code}
# r1soft-setup --help
{code}# r1soft-setup --help{code}
{code}
1. Define a _username_ and _password_ for the CDP Server Web Interface.
{code}
# r1soft-setup --user DESIRED_USERNAME --pass DESIRED_PASSWORD
{code}# r1soft-setup --user DESIRED_USERNAME --pass DESIRED_PASSWORD{code}
{code}
After running you will see output similar to:
{code}
# {code}# r1soft-setup --user admin --pass r1soft
Server username and password set
The R1Soft CDP Server must be restarted for these changes to take effect
Use '/etc/init.d/cdp-server restart' to restart.{code}
{code}
!apt-get-install06.png!

2. By default, the embedded web server required for the Web-based Interface will listen on TCP ports 80 (HTTP) and 443 (HTTPS). These ports are frequently in use by your Linux Server (e.g. by Apache). If you are already using ports 80 and 443, you will need to define different ports. 8080 (HTTP) and 8443 (HTTPS) are recommended alternatives to standard 80 and 443. You can chose any valid and unused TCP port that you like.
{code}
# r1soft-setup --http-port 8080 --https-port 8443
{code}# r1soft-setup --http-port 8080 --https-port 8443{code}
{code}
3. Start the Web Interface (CDP Server):
{code}
/etc/init.d/cdp-server restart
{code}/etc/init.d/cdp-server restart{code}
{code}
4. You may need to change firewall rules depending on where you are connecting to the Web Interface from.

...