Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current  |   View Page History

Symptom


Error with 3.x Agent unloading properly in all versions of CDP:

Could not start snapshot: Operation not permitted (StartSnapshot:88)

Cause


The problem is with the unloading of the Agent in any 3.x version.

When the agent module is removed (rmmod), the problem occurs and the only fix is to reboot the Host OS. The problem exists in upgrades because the process of the upgrade performs a rmmod on the cdp-agent module.

The Development Team has resolved this problem the next release, you should upgrade to the latest version.

Resolution


1. If you use 3.6.x, you need to do the following prior to upgrading above 3.6, or if you are installing a newer Agent.

Unlock the hcpdriver:

# /usr/sbin/r1soft/bin/cdp -u

Stop the Agent:

# /etc/init.d/cdp-agent stop

Remove the driver:

# rmmod hcpdriver

2. If you are at version 3.7.5, you will need to do the following prior to upgrading above 3.7, or if you are installing a new Agent.

The procedure below will also allow you to fix the StartSnaphot:88 error without having to reboot. You can start the cdp-agent after removing the hcpdriver manually.

Stop the Agent:

# /etc/init.d/cdp-agent stop

Remove the driver:

# rmmod hcpdriver

Labels:
None
Enter labels to add to this page:
Please wait 
Looking for a label? Just start typing.